Format a USB drive (8GB or smaller recommended) to FAT32 .
Do not turn off the power while the LED is blinking, as this can "brick" the board.
Use WinRAR or 7-Zip to extract the downloaded .rar archive. You should see a file named SI6M_56_E.bin (or similar). Format a USB drive (8GB or smaller recommended) to FAT32
Ensure your LVDS cable and panel voltage (3.3V, 5V, or 12V) are correctly set via the jumper on the board before powering on, or you may damage the screen.
Once the blinking stops or the TV reboots, remove the USB drive. Important Safety Notes You should see a file named SI6M_56_E
.rar (Requires extraction to get the .bin file) Update Method: USB Interface How to Install the Firmware
The indicator light (LED) should start blinking rapidly, signaling the update is in progress. Important Safety Notes
This is a "General" firmware, meaning it usually supports standard remote controls. If your remote doesn't work after flashing, you may need to use the physical buttons on the TV to access the menu and adjust settings.