The standby light should flash rapidly. Do not turn off the power until it finishes. ⚠️ Safety Warning
You must have Part 01, Part 02, Part 03, Part 04, and Part 05 in the same folder.
Installing the wrong firmware can "brick" your TV permanently. Always verify: The matches the firmware.
Right-click only Part 01 and select "Extract Here." Software: Use WinRAR or 7-Zip for the best results. How to Install the Firmware
Place the firmware file in the root directory (not inside a folder). Flash the TV: Unplug the TV from power. Insert the USB drive. Press and hold the Power button on the TV cabinet. Plug the TV back in while holding the button.
If you are looking for remember these rules to avoid a "Corrupt Archive" error: