Download Juc7 820 00169579 Condor U55g7300 Firmware Part02 Rar -

Copy the extracted firmware file (usually named MstarUpgrade.bin or similar) directly to the of the USB (do not put it in a folder). 🛠 Installation Methods

Depending on whether your TV is currently functional or stuck on a logo (boot loop), use one of the following methods: Insert the USB drive into the TV's USB port.

Navigate to > Settings > System > Software Update > By USB . The TV should detect the file and ask to begin the update. Method 2: Forced Flash (For Boot Loops/Black Screens) Power off the TV and unplug the power cord. Insert the USB drive into the TV's USB 2.0 port. Copy the extracted firmware file (usually named MstarUpgrade

: Multi-part archives like yours cannot be opened individually. You must download all parts (Part 01, Part 02, etc.) into the same folder on your computer.

: Right-click on the first part (Part 01) and select "Extract Here." This will automatically combine all parts into a single .bin or .img firmware file. Prepare a USB Drive : Use a USB drive with at least 1GB of storage. Format it to FAT32 . The TV should detect the file and ask to begin the update

(or sometimes the CH+ button) on the TV panel, not the remote. While holding the button, plug the power cord back in.

Continue holding until you see an "Upgrading" bar or the power indicator starts flashing. : Multi-part archives like yours cannot be opened

: Do not turn off the power or remove the USB during this process, as it can permanently damage the main board. 🔍 Finding the Download Link Firmware for Condor models using the JUC7.820.00169579